Mechanical ventilator BRINA
High-end mechanical ventilator that provides invasive and non-invasive ventilation, for adult, pediatric and neonatal patients
Wide variety of ventilation modes and tools for personalized and different clinical needs:
AVA (Adaptive Ventilatory Assist)
The AVA mode is an adaptive mode with optimal control that guarantees minute ventilation of the patient, generating a ventilatory pattern with the minimal respiratory work
High-Flow Oxygen Therapy (HFOT)
Oxygen therapy administered through nasal cannulas or masks has always been the first approach to alleviate hypoxemia in patients. The addition of this method expands the use of the ventilator to the stages that are prior and after the mechanical ventilation itself, by providing non-invasive assistance to oxygenation.
Volumetric capnography (optional)
Integrated monitoring of exhaled CO2 and display of volumetric curves over time, as well as measurements of physiological dead space.
Masimo Pulse Oximeter (optional)
Integrated monitoring of SpO2, pulse rate and pletysmography curve
VENTILATION MODES:
- Volume-Controlled Ventilation (VCV),
- Pressure-Controlled Ventilation (PCV),
- Ventilation with Pressure-Regulated Volume Control (PRVC),
- Pressure Support Ventilation/CPAP (PSV/CPAP),
- Continuous Positive Airway Pressure (CPAP),
- Volume Support Ventilation (VSV),
- Synchronized Intermittent Mandatory Ventilation - pressure and volume: SIMV (VCV) + PSV, SIMV (PCV) + PSV, SIMV (PRVC) + PSV,
- Mandatory Minute Ventilation with Pressure Support (MMV WITH PSV),
- Airway Pressure Relief Ventilation (APRV),
- Non-Invasive Ventilation (NIV),
- CPAP Continuous Flow (Available with NEO category),
- TCPL - Time-Cycled Pressure-Limited Ventilation (Available with NEO category),
- SIMV (TCPL) + PSV - Synchronized Intermittent Mandatory Ventilation (Available with NEO category),
- Backup Ventilation (Backup ventilation)
A step forward in design
|
|
|
Smart and intuitive interface |
|
|
|
|
|
Detachable and rotative Highly visible alarm indicator. The design of the VentBox gives the user the possibility to mount it on a trolley, ceiling supply or shelf. |
Improved design for more accurate measurements
| |
The Expiratory Port has been specially developed for a more direct and precise electronic control of the respiratory phases of the breathing cycle. It enables an improved response time and the spontaneous breathing of the patient even during the inspiratory phase in the pressure-controlled modes.
The Paramagnetic oxygen sensor has been integrated to perform efficiently and continuously throughout the life cycle of the ventilator, removing need of a periodic replacement.
|
Simple and clean user interface.
Designed to take important decisions in different situations
|
Active Lung
Active lung for a graphic and better visualization of the patient's ventilatory condition. The compliance of the lung and the resistance of the airway are shown graphically and numerically. The lungs, together with the diaphragm, expand and contract synchronizing with the patient's breaths |
|
|
Numerical Screen
Visualization designed to be used during the medical room review, improving the visibility of the parameters from a distance. |
|
Installations:
Manufacturer: TECME, USA
